STANDING UP TO THE COMPETITION
Comparing today’s rebar fabrication equipment can be confusing. Some of the confusion is in the words used to describe the equipment’s benefits. The following example reveals how several rebar fabrication equipment manufactures define the word "portable": Some company’s claim that by placing their rebar fabrication machines on a trailer and pulling it from job to job, their system is " portable". Others claim that it takes only two men to lift their machine on to the back of a flat bed truck. They also define their system as " portable". Yet, other manufactures describe their hand-operated tools weighing 50, 60, 70 pounds or more as "portable". Further, and for good reason, most of their construction site pictures illustrate their tools sitting on the ground.
We feel the EZE BEND SYSTEM illustrates the true meaning of the word ‘portable’. When compared to competitive tools that operate at the same capacity, every EZE BEND Bender and Cutter is significantly lighter. For example, the EZE BEND 6-Bender, at just 17 pounds, and EZE BEND 8-Cutter, at just 37 pounds, are nearly one-half the weight of the closest competitors tool.
At a glance, it is easy to see that the EZE BEND Benders and Cutters are significantly smaller. The smaller size is important when reaching inside of formwork or within a maze of existing rebar. The size and weight make the EZE BEND SYSTEM the most easily manipulated tool on the market.
Every EZE BEND Bender and Cutter also rotates 360 degrees. This feature allows cast-in-place rebar fabrication and enhances construction site rebar placement. HOW DOES THE EZE BEND SYSTEM
DIFFER FROM ALL OTHER
REBAR FABRICATION SYSTEMS?

1. All EZE BEND Benders and Cutters can be held and operated with just a single hand.
2. Compared to hand operated tools of equal capacity, the EZE BEND Benders and Cutters are lighter, smaller, and rotate 360 degrees.

These first two differences open the door for greater application possibilities. For example, the EZE BEND Benders and Cutters can be used for production fabrication or at the point of rebar installation. By rotating the head, they can reach inside of forms or fabricate cast-in-place rebar. For greater SAFETY, they can be easily operated with one hand while the other is left completely free. A separate hydraulic pump powers the EZE BEND SYSTEM. Employing a separate pump specifically enables each of the following features.
1. Lightweight Benders and Cutters – The pump provides the system’s power, allowing a basic and lightweight ‘cylinder with a button’ design for each tool.
2. Simplicity and Dependability – With the power needs provided by the pump, the Benders and Cutters are manufactured with just a few dozen dependable components.
3. Voltage – The standard electrical power voltage is conveniently stepped down at the pump, leaving just 20 safe volts in the hand of the operator.
4. Forgiving action – The dump-style hydraulic pump allows the oil to flow immediately back in to the tank whenever the button is released. This unique feature enables last-second corrections, incremental operation that is required for bar straightening, and a greater ability to avoid personal injury.
5. Enerpac – EZE BEND INC. chose pumps manufactured by the industry’s leader in hydraulics, Enerpac. Authorized service centers are available nationwide, providing security and dependability to the entire system.
6. Made in the USA – By depending on Enerpac for the hydraulic pumps, EZE BEND INC. can place 100 percent effort on the Benders, Cutters, and Hoses. This insures quality American construction on all components.
Most rebar fabrication equipment is manufactured in a foreign country. The cheap mass production procedures are easy to identify. The forging process is a typical indicator.
Just look closely at every EZE BEND product. You will see exact mill work on hardened steel. You will see consistent pride in workmanship, guaranteed.